Tanks

Description

DHW cylinder according to DIN 4753, enamelled with smooth pipe heat exchanger featuring a large surface for quick heating and high levels of comfort in combination with Mitsubishi Electric air-to-water heat pumps.

Features/fittings

Integrated magnesium anode and factory-installed thermometer; pentane foam insulation (50 mm) in foil cladding; maintenance and cleaning opening; max. operating pressure: 10 bar (DHW); max. operating temperature: 95°C (DHW).

Description

Buffer storage tank for use with Mitsubishi Electric heat pumps. Suitable for storage of heating water according to VDI2035. For use as a heating and cooling buffer, as a separating tank for hydraulic decoupling and for providing the necessary defrosting energy. Storage tank made from quality steel S235JRG2 (St37-2). Impermeable insulation made from pentane-driven foam with laminated foil cladding (colour: white).

Features / equipment

Floor-standing installation possible; fixing material not included in scope of delivery; 2x heating flow/return connections; 2x heat pump flow/return connections; 1x connection for electric heating rod, centre; operating temperature (according to EN 12897) min. 5 °C & max. 95 °C.

Description

Buffer storage tank for use with Mitsubishi Electric heat pumps. Suitable for storage of heating water according to VDI2035. For use as a heating and cooling buffer, as a separating tank for hydraulic decoupling and for providing the necessary defrosting energy. Storage tank made from quality steel S235JRG2 (St37-2). Impermeable insulation made from pentane-driven foam. Sheet covering coloured white.

Features / equipment

Choice of wall-mounted (PS100-1 only) or floor-standing installation possible; wall bracket for wall-mounted installation included in scope of delivery as standard, with fixing material provided on site; 2x heating flow/return connections; 2x heat pump flow/return connections; 1x connection for electric heating rod, centre; max. positive operating pressure 3 bar; operating temperature (according to EN 12897) min. 5 °C & max. 95 °C.

Description

The PZ/PZR multifunction buffer storage tank is suitable for all hot water central heating systems featuring heat pumps and enables the additional integration of solid fuel boilers, oil-fired boilers, solar plants, gas flow heaters and electric flow heaters. The multifunction buffer storage tank is equipped with a stove-enamelled powder coating for perfect corrosion protection. An integrated layer separating plate and thermal layer unit ensure optimum temperature layering and thus enable the efficient production of hot water. In the ECO SWIFT-EZ fresh water station, the drinking water is heated to the specified tapping temperature according to the throughflow principle. In this way, the integrated heat exchanger is always supplied with the smallest amount of heating water from the buffer storage tank that is necessary in order to maintain a constant tapping temperature. The special design of the heat exchanger means that a low return temperature of the heating water to the buffer storage tank is to be anticipated. In recording the temperature difference and volume flow data, the electronic control system simultaneously determines and stores the amount of heat that is consumed. The fresh water station is equipped with a circulation connection including a pump. This pump is activated by the integrated control system via a dedicated program.

Features / equipment – multifunction tank PZ(R)

Nominal content 780 litres; large-surface solar pipe register in PZR type; operating pressure 3 bar, test pressure 4.5 bar in buffer storage tank; operating pressure max. 10 bar, test pressure 15 bar in pipe register in PZR type; 2x sensor channels for variable positioning of the sensors in PZ/PZR type; external powder coating (colour deviations); innovative fleece insulation with stable, shape-retaining 100 mm polystyrene sheath.